Tin Can Herb Pots
What you'll need:
Empty aluminum can
Screwdriver and hammer
Liquitex Basics
GessoAcrylic craft paints in colors of your choice
Flower stickers (optional)
Acrylic sealer spray, matte finish
Craft or popsicle stick
Thin cardboard
Pinking shears
Black Sharpie marker
5-10 small rocks, stones or pebbles
1.5 cups Potting soil
4-inch potted herb plant
White craft glueWater
How to make it:
1.Completely wash and dry aluminum can. If necessary, sand off any rough edges from opening of can.
2. Turn can upside down. Parent should use screwdriver or other pointed object to poke holes in the bottom of the can. Use a hammer to tap the end of the screwdriver to make the holes.
3. Paint outside of can with one coat of Gesso. Let dry completely.
Paint can desired color, repeat coats if needed.
4. Decorate however you like. Use a thin paint brush for long lines, dip the end of the paint brush into paint for polka dots.
5. Decorate with stickers if desired.
6. Spray the outside of the completed can with acrylic sealer spray. Let dry.
7. Place enough rocks or pebbles in the bottom of the can to form a single layer.
8. Add enough potting soil to fill the can two-thirds full.
8. Remove potted herb from its container and transplant into the can.
9. Fill edges with remaining potting soil, gently pat down so that plant is firmly in the can but not compacted so much that it’s too tight.
10. Place can on a plate (to catch any water drainage) and add some water to the newly planted herbs.
11. Paint craft stick whatever color you like. Allow to dry.
12. Cut a piece of thin cardboard into a small rectangle (about 1.5 x 3 inches) using pinking shears.
12. Paint both side of the cardboard with Gesso, let dry.
13. Glue the rectangle to the top of the craft stick.
14. Use a black Sharpie marker to write the herb name onto the rectangle.
15. Insert your plant marker into the soil, being careful not to crush any roots along the way.
17. Place your new garden in a sunny window and remember to water them!
3. Paint outside of can with one coat of Gesso. Let dry completely.
Paint can desired color, repeat coats if needed.
4. Decorate however you like. Use a thin paint brush for long lines, dip the end of the paint brush into paint for polka dots.
5. Decorate with stickers if desired.
6. Spray the outside of the completed can with acrylic sealer spray. Let dry.
7. Place enough rocks or pebbles in the bottom of the can to form a single layer.
8. Add enough potting soil to fill the can two-thirds full.
8. Remove potted herb from its container and transplant into the can.
9. Fill edges with remaining potting soil, gently pat down so that plant is firmly in the can but not compacted so much that it’s too tight.
10. Place can on a plate (to catch any water drainage) and add some water to the newly planted herbs.
11. Paint craft stick whatever color you like. Allow to dry.
12. Cut a piece of thin cardboard into a small rectangle (about 1.5 x 3 inches) using pinking shears.
12. Paint both side of the cardboard with Gesso, let dry.
13. Glue the rectangle to the top of the craft stick.
14. Use a black Sharpie marker to write the herb name onto the rectangle.
15. Insert your plant marker into the soil, being careful not to crush any roots along the way.
17. Place your new garden in a sunny window and remember to water them!
No comments:
Post a Comment